Whole Milled Fillet Clamps for TSProf K03 and Kadet
Code: TS-PT2000172Related products
Product detailed description
They are designed for sharpening fillet knives, multi-tools, and Scandinavian-type knives, up to 3.5 mm thick.
The mathematically verified radial-convex shape of the outer surface allows you to set the sharpening angle of only 7.2° per side.
Heavy-duty material, aviation aluminum, and new processing technologies have allowed achieving a minimum thickness of the jaws, without loss of wear resistance. The width of the clamps is selected in such a way as to allow you to install up to 4 clamps simultaneously on the frame to securely fix even the most flexible fillet knife.
The clamps do not require calibration and are clamped by tightening just one screw.
Characteristics:
- Length of clamps: 118 mm
- Minimum sharpening angle: 7.2°
- Recommended knife length: 30-300 mm
- Minimum width of a knife: 10 mm
- Jaws thickness: 1 mm
- Clamp width: 21 mm
- The maximum thickness of the spine: is 3.5 mm
- 2 pc.
7,2° can be reached if:
- knife's spine thickness 1 mm and overhang from 12 mm
- knife's spine thickness 1,5 mm and overhang from 16mm
- knife's spine thickness 3,5 mm and overhang from 23 mm
TSPROF je rúská firma, ktorá vyrába jedny z najlepších brúsnych systémov na nože a dláta na svete. Prvé dizajnérske práce na základných prvkoch brúsky Profile sa začali už v roku 2010. Dovtedy zavedené metódy ručného brúsenia sa uskutočňovali hlavne pomocou primitívnych plastových „záloh“ vyrobených vo forme mnohých čínskych klonov.