Slingshot TTF TOPBLADE P-1

Product detailed description

The slingshot was designed to meet the requirements of sport shooting as well as hunting (in countries where it is allowed). The asymmetrical body of the slingshot is shaped to fit comfortably in the shooter's hand and to minimize the shooter's effort when shooting, which contributes to accurate shooting.

Thanks to the material used, the surface ensures a firm and secure hold in the hand even in wet conditions or with gloves. The slingshot is comfortable to hold thanks to the slightly rough surface structure and in cold conditions it does not have a cooling effect on the hand like e.g. duralumin slingshots.

Our unique rubber band attachment solution is designed to make changing and adjusting the length as easy as possible, fast and without the need for tools. Simply put the included O-ring on the rubber band, place it on the slingshot in the correct position and length, then press the clamping plate on it so that it presses the rubber band into the groove and pull the pre-stretched O-ring through the clamping point. After assembly, check the symmetry and whether the length suits you and if it is okay, you can cut off the remaining pieces of rubber band. (Warning!!! Before assembling the rubber bands, make sure that the surface of the clamp as well as the rubber band itself is not dirty or greasy; if necessary, degrease the surface thoroughly with e.g. alcohol.)

It is possible to use most commonly used rubber bands, but at the same time there is still the option of classic tying in case you prefer this method or would like to use exceptionally thicker rubber bands.

• one is a V-shaped cutout that the rubber copies after stretching, and the shooter can accurately aim at the target by looking through this profile
   
• The second aiming system on our slingshot is an additional sight with a light guide with a thickness of 1.5 mm and a length of about 10 mm. This system of ours makes aiming much easier. The light guide is exposed from the top and fixed from the bottom in a translucent material to ensure the best possible light distribution even in poor lighting conditions. All you need to do is look at the sight with the light guide, on which you can see exactly the horizontal and vertical rotation of the slingshot, align it towards the target, aim at it and shoot.
   

Thanks to the material used and the production method, if necessary, the slingshot can be easily adjusted in the grip zone by simply sanding it with fine sandpaper underwater. 

Lifetime warranty on frame. Does not cover damage caused by rough handling or damage caused by misuse.

THE MANUFACTURER AND THE DEALER ARE NOT RESPONSIBLE FOR PROPERTY DAMAGE, PERSONAL INJURY, INJURY TO OTHERS OR ANIMALS CAUSED BY SHOOTING FROM A SLINGSHOT. THE MANUFACTURER AND THE DEALER DISCLAIM ALL LIABILITY FOR ANY PROBLEMS, INJURY OR PROPERTY DAMAGE.

Never stretch the rubber in the opposite direction, as this may cause the rubber to come loose and cause injury.

Instructions on how to assemble the slingshot:

• In the video, the slingshot is folded for a right-handed person (the TOPBLADE inscription faces the body), i.e. we hold the slingshot in our left hand and stretch the rubber band with our right hand.
   
• When folding the slingshot for a left-handed person, the TOPBLADE inscription points away from the body, the slingshot is held in the right hand and the rubber band is pulled with the left hand.
   

Slingshot TOPBLADE P-1 Shooting

TTF TOPBLADE P-1 slingshot durability test:

•  shooting from a slingshot P-1 with 9.5 mm pellets, distance 5 m
• shooting from an air rifle with 4.5 mm target pellets, distance 5 m
• bending in a vice
• passing a slingshot over a car weighing 1.8 tons

Test result: the slingshot did not break or crack.

Please do not try this at home!